Updating hard drive hdd

You can use the software copy to transfer the data from your old Hard Drive over to your PC or MAC.The disk data format (directory and file structures) is not compatible with any commercial (PC / MAC) operating system, this is why you might need the software copy .There's no better way to speed up and upgrade a laptop than to replace its mechanical drive with an SSD (Solid State Drive).It's a no-brainer, but if the thought of reinstalling Windows 10 and all of your programs and then tweaking all of their settings gives you the chills, don't worry.In an hour or two, you can easily be up and running with a clone of your current system -- except now your laptop will have blazing performance. The process of upgrading your laptop to SSD is fairly simple if you have easy access to your hard drive via a removable panel on the bottom of the laptop.If you have an Ultrabook or your laptop doesn't have that kind of easy upgrade access (e.g., the bottom panel is sealed), it's a whole different ballgame, and you'll need to consult your laptop manual for instructions on getting to that drive and finding the right replacement drive.So, if you want to install Windows 7 on an external hard drive you need to follow the steps given below.

Requirements: # An external hard drive formatted with NTFS # Windows 7 installation files (if you have Windows 7 ISO use Virtual Clone Drive freeware to mount it) # Windows Automated Installation Kit (free download from Microsoft) NOTE: Make sure that you have a minimum of 15 GB free space on your external hard drive before starting the procedure.

Also, even 2.5-inch drives can have different thicknesses-- 7 mm or 9.5 mm--and different interfaces (SATA or IDE, usually in laptops from 2008 or before).

Laptops most widely use 2.5-inch SATA drives , but you should check your laptop manual or specifications to make sure you buy the right size SSD with the proper interface.

The owner of the laptop contacted Dell and got ahold of a recovery USB.

The computer can boot into the recovery environment off of the USB, but the repair process will fail, stating that the hard drive is locked and cannot be accessed.